DC pen click here for a high resolution image of the Volt Stick CIE
• Volt Stick DC Test Kit
DC kit click here for a high resolution image of the Volt Stick CIE

The DC is an instrument for testing DC presence in wires in cars, trucks and other vehicles without metallic contact. The user can in a few seconds find breaks in cables, detect live wires and find faulty fuses.

The DC consists of two units, a transmitter and a receiver. The transmitter is connected to the car battery and produces a very weak signal. The receiver is held against the cable to be tested and indicates the produced signal from the transmitter if the cable is connected to the battery. The transmitter can also be connected to non-live wires. In that case it generates a signal by the use of its built-in battery. The transmitter can also be used as a voltmeter, continuity tester with built-in buzzer and resistance meter.

General Transmitter Specifications:
• Connects to the vehicles battery or non enegized circuits
• Automatic adjustment of 12 / 24 volts systems
• Displays the system voltage
• Resistance meter, 1-1000 ohm
• Continuity test with built-in buzzer
• Automatic error checking
• Powered by 2 AA batterier (R6). can also be powered by the external car battery

General Receiver Specifications:
Easy to use
No damage to cables or insulation
High selectivity using the forked tip (patent applied for)
Adapter included for testing larger objects, fuses etc
Fully insulated design eliminates the risk of short curcuits
Powerful red light in the forked tip when voltage is detected
Powered by 2 AAA (LR03) batteries

 
Volt Stick DC Test Kit complete
 
   
 
Model:   Volt Stick DC:    
Voltage range: 220 ~ 230 Volts AC  
Sensitivity: Functions @ 4mm distance from 2.5mm² conductor carrying 220V AC  
Response Time: Immediate  
Intrinsically Safe: No  
Power Requirements: 2 x AAA (LR03) batteries (inc)  
RH: 80% @ 30°C, 50% @ 40°C  
Operating Temp: -10° ~ +50°C  
Overvoltage: CAT III 1000V AC  
Dimensions: 145(L) x 18(W) x 20(H) mm  
Weight: 40g (inc.batteries)
     
     

       
 
All models are fully approved to IEC 61010-1, CAT111 1000V AC and CE. Are yours?!!